TA Series FXO VoIP Gateway

FXO VoIP Gateway

Yeastar TA FXO VoIP Gateways provides 4, 8, or 16 ports to connect analog telephone lines or PABX extension interface to VoIP networks. It is a cost-effective and reliable solution for office-to-office voice connectivity.

An FXO VoIP Gateway is a device that enables the connection of legacy analog phone lines to a modern Voice over Internet Protocol (VoIP) phone system. The FXO (Foreign eXchange Office) interface is used to connect the analog phone line to the gateway, which then converts the analog signal to a digital signal that can be transmitted over an IP network.

FXO VoIP gateways are commonly used by businesses that have existing analog phone lines but want to switch to a VoIP phone system. The gateway allows the business to maintain its existing phone numbers and infrastructure while also benefiting from the features and cost savings of a VoIP system.

FXO VoIP Gateway in Dubai, UAE

The gateway may also provide additional features such as call routing, automatic failover, and support for multiple phone lines. Some gateways can also be configured to support both FXO and FXS (Foreign eXchange Station) interfaces, which enables the connection of both analog phone lines and analog phones to the VoIP system.

Overall, an FXO VoIP gateway is a useful tool for businesses that want to migrate to a VoIP phone system while also retaining their existing analog infrastructure.

Benefit

► Businesses of all sizes can rely on this innovative solution.

► Toll-quality voice call and top performance and reliability.

Feature-rich

Feature-Rich-Yeastar

A robust feature set that fulfills your various needs and cuts communication cost

Simple and Easy

Easy-Yeastar

User-friendly Web GUI and intuitive operations. Comprehensive call log, system logs, hardware logs, and debug logs

High Performance

Superb voice compression with industry standard codecs. Tested and certified with Elastix and compatible with other IP systems

Auto Provisioning

FXO-VoIP

Support PnP or DHCP provisioning by Yeastar PBX and standard open protocol TR-069

Specifications

Models
TA410
TA810
TA1610
RJ11 FXO Ports
4
8
16
RJ 21 Ports
1
LAN
1 10/100Mbps
Protocol
SIP (RFC3261), IAX2
Transport
UDP, TCP, TLS, SRTP
Codec
G.711 (alaw/ulaw), G.722, G.723, G.726, G.729A, GSM, ADPCM
Voice Capability
ITU-T G.168 LEC Echo Cancellation, Dynamic Jitter Buffer, VAD, CNG, PLC
DTMF Mode
RFC2833, SIP Info, In-band
Fax
T.30
QoS
DiffServ, ToS, 802.1 P/Q VLAN tagging
Network
DHCP, DDNS, OpenVPN, PPPoE, Static Route, VLAN
Network Protocol
FTP, TFTP, HTTP, HTTPS, SSH
Management Protocol
RADIUS
SNMP, RADIUS, TR-069
Signaling
FXS Loop Start, FXS Kewl Start
Caller ID
BELL202, ETSI (V23), NTT (V23-Japan), and DTMF-based CID
Disconnect Methods
Busy Tone, Polarity Reversal
FXO Connectivity
Programmable AC Impedance, Hangup Detection, Answer Detection, Caller ID Detection
Power
12V, 1A
AC 100-240V (12V 5A)
Dimensions (L × W × H) (mm)
200 × 137 × 25
440 × 250 × 44
Operation Range
0°C to 40°C, 32°F to 104°F
Storage Range
-20°C to 65°C, -4°F to 149°F
Humidity
10-90% non-condensing
Mounting
Desktop, Wall-mount
Desktop, Rack-mount
Compatibility
Interoperable with Asterisk, Lync Server, FreePBX and certified with Elastix.

Features

  • Answer Detection
  • API
  • Attack Alert
  • Auto Provisioning with Yeatsar PBX
  • Backup and Restore
  • Call Back
  • Call Detail Records
  • Caller ID Display
  • Firewall
  • Firmware Upgrade by HTTP/TFTP
  • Hangup Detection
  • Hotline
  • IP Blacklist
  • Nat Traversal
  • Packet Capture Tool
  • Programmable AC Impedance
  • System Logs
  • Two-stage Dialing
  • Web-based Management